Fluid Power Engineering · Since 2010
Engineered for Extreme Pressure: Precision Hydraulic Cylinders
Delivering custom-engineered hydraulic cylinders — bore 35 mm to 1000 mm, pressure up to 700 Bar — from Ahmedabad, India, since 2010.
- Established 2010 · Ahmedabad
- Tested per ANSI / IS 10585
- Custom Bore & Stroke on Every Order
What We Build
Nine cylinder lines. One testing standard.
Every cylinder is engineered to spec and tested per ANSI/IS 10585 before it leaves Ahmedabad.
Double Acting Hydraulic Cylinders
Powered extend and retract strokes for continuous-duty industrial and mobile equipment.
View specificationsSingle-Acting Cylinders
Hydraulically powered on one stroke, with gravity or spring return for the other.
View specificationsRam-Type Cylinders
Large-bore, single rod construction for high-force, short-stroke applications.
View specificationsCustom Cylinder End Mechanisms
Clevis, trunnion, flange or a mounting geometry built to your machine, not a catalog default.
View specificationsHydraulic Cylinder Cushioning
Adjustable or non-adjustable end-of-stroke cushioning to protect the machine and the cylinder.
View specificationsIntegral Cylinder Stop Tubes
Stop tube construction built into extra-long-stroke cylinders to protect the rod bearing.
View specificationsWhy Tech Fluid Industries
Built for duty cycles that don't forgive shortcuts.
Custom Engineering
Every cylinder is specified to your bore, stroke, pressure and mounting — not pulled from a generic catalog.
In-House Machining
12 machines on our own shop floor, from horizontal/vertical boring to a dedicated hydraulic cylinder testing machine.
Chrome-Plated & Marine-Coated
Bore and rod finish matched to the duty cycle — from standard chrome plating to marine-grade surface coating.
Established 2010
Manufacturer, supplier, distributor and trader of oil hydraulic equipment, built on 15–18 years of shop-floor experience.
How We Work
From enquiry to dispatch — no shortcuts.
- 01
Enquiry & Spec Review
Send your bore, stroke, pressure or mounting requirement. Our engineers confirm feasibility within one business day.
- 02
Drawing & Approval
We draft to your mounting and duty-cycle requirement and share a drawing for sign-off before cutting any steel.
- 03
Manufacturing
Machined and assembled in-house at Kathwada GIDC on CDS tube to ASTM A106 Gr. B / DIN 2391.
- 04
Testing
Every unit is tested per ANSI/IS 10585 for pressure, static and internal leakage, and static friction.
- 05
Dispatch & Support
Packed and dispatched with our engineering team on call for install or commissioning questions.
Industries Served
Wherever fluid has to move a load.
Mining Equipment
Marine Equipment
Defense Equipment
Railways
Steel Plants
Construction Equipment
Mining
Construction
Marine & Port HandlingQuality Assurance
Every unit tested per ANSI / IS 10585 before it ships.
Pressure, static and internal leakage, and static friction — tested on our own rigs, with results logged against every order.
View our full QA protocol- Test Standard
- ANSI / IS 10585
- Tests Performed
- Pressure, static and internal leakage, static friction
- Material Traceability
- CDS tube to ASTM A106 Gr. B / DIN 2391
- Seal Sourcing
- Bushak Shamban, Parker, Hunger, Simrit
Engineering FAQ
Straight answers to the specs that matter.
Genuine questions our engineering team gets asked most — on materials, testing and standards.
Our Product Range spans a 35 mm to 1000 mm bore, 16 mm to 500 mm rod, strokes up to 5000 mm, and working pressure up to 700 Bar, with mounting available as front/rear flange, foot & lug, trunnion or clevis, per ISO 6020 and ISO 6022. Every order is built to your specific point within that range, not a fixed catalog size.
Nine lines: Double Acting, Single-Acting, Ram-Type, Custom Cylinder End Mechanisms, Hydraulic Cylinder Cushioning, Integral Cylinder Stop Tubes, Position Sensing Cylinders, Re-Phasing Type Cylinders, and fully Custom Designed Cylinders.
Cylinder bore conforms to ISO 3320 / IS 8208. Mounting dimensions follow ISO 6020 and ISO 6022. Every unit is tested to ANSI / IS 10585 for pressure, static and internal leakage, and static friction before dispatch.
Cylinders are built from cold drawn seamless (CDS) steel tube conforming to ASTM A106 Grade B or DIN 2391, precision honed. Seals are sourced from Bushak Shamban, Parker, Hunger or Simrit, with an imported sealing system and non-metallic guide rings on piston and rod as standard.
Yes — the inner diameter is chrome plated as standard for corrosion resistance and low seal friction, and the cylinder outside surface can be coated specifically for marine application.
ISO certification is currently under process. We already build and test to ISO 3320/IS 8208 (bore), ISO 6020/6022 (mounting) and ANSI/IS 10585 (testing) principles as our working standard.